Certifications & Compliance Authority
Comprehensive certification portfolio demonstrating adherence to CPCB-IV+, Stage-V, Euro-VI, and Euro-VII emission standards. Our testing and validation infrastructure ensures regulatory readiness and long-term compliance confidence for OEM partners.
Certifications
15+
Test Labs
4
Testing Hours
50,000+
Regulatory Certification Portfolio
Comprehensive compliance documentation validated by national and international regulatory authorities
CPCB-IV+ Emission Compliance
Central Pollution Control Board (CPCB)
Comprehensive certification for diesel engine emission control systems meeting CPCB-IV+ norms for NOx, PM, HC, and CO emissions across 75-560 kW power range.
Compliance Standards
Stage-V CEV Compliance
Automotive Research Association of India (ARAI)
Stage-V emission compliance certification for construction equipment vehicles (CEV) with advanced SCR and DPF integration meeting TREM-IV standards.
Compliance Standards
Euro-VI Reference Standard
International Centre for Automotive Technology (ICAT)
Euro-VI emission standard compliance for export-oriented emission control systems with NOx reduction efficiency >95% and PM filtration >99%.
Compliance Standards
ISO 9001:2015 Quality Management
Bureau of Indian Standards (BIS)
Quality management system certification covering design, manufacturing, testing, and validation of emission control systems with continuous improvement protocols.
Compliance Standards
NABL Testing Laboratory Accreditation
National Accreditation Board for Testing (NABL)
Accreditation for emission testing laboratory with ISO/IEC 17025:2017 compliance covering engine dynamometer testing, gas analysis, and particulate measurement.
Compliance Standards
Euro-VII Readiness Certification
European Automotive Standards Authority
Pre-compliance certification for upcoming Euro-VII emission standards with advanced NOx control, ammonia slip monitoring, and real-world emission validation.
Compliance Standards
Compliance Journey Timeline
Track our progression through emission regulation milestones and future compliance roadmap
Validation & Testing Capabilities
State-of-the-art testing laboratories and validation infrastructure for comprehensive emission control system verification
Engine Emission Test Laboratory
State-of-the-art emission testing facility with transient and steady-state dynamometer capabilities for comprehensive validation of diesel engine emission control systems.
Accreditation
NABL Accredited (ISO/IEC 17025:2017) - Certificate No. TC-8934
Testing Capabilities
- Transient cycle testing (WHTC, NRTC)
- Steady-state emission measurement (ESC, ETC)
- Real-time NOx, PM, HC, CO analysis
- Particulate matter gravimetric measurement
- Ammonia slip and N2O monitoring
Key Equipment
AVL APA 604 Emission Analyzer
NOx accuracy ±2 ppm, CO ±10 ppm
Horiba MEXA-7100DEGR
Multi-component gas analyzer with FTIR
AVL 415S Smoke Meter
FSN 0-10, opacity 0-100%
Eddy Current Dynamometer
560 kW absorption, 3000 rpm max
Endurance & Durability Testing Facility
Long-term validation infrastructure for emission control system durability testing with accelerated aging protocols and real-world simulation capabilities.
Accreditation
ARAI Approved Testing Facility - Registration No. ATF-2024-567
Testing Capabilities
- 10,000+ hour endurance testing
- Thermal cycling and shock testing
- Vibration and mechanical stress simulation
- Catalyst aging and deactivation studies
- DPF regeneration cycle validation
Key Equipment
Environmental Test Chamber
-40°C to +150°C, humidity control
Multi-Axis Vibration Table
50 Hz max, 100g acceleration
Thermal Shock Chamber
±180°C/min ramp rate
Automated Data Acquisition
1000 channels, 1 kHz sampling
Clean Room Assembly & Validation
ISO Class 7 clean room facility for precision assembly of emission control components with contamination-free manufacturing and quality validation protocols.
Accreditation
ISO 14644-1:2015 Certified Clean Room - Audit No. CR-2024-089
Testing Capabilities
- ISO Class 7 (10,000) clean room environment
- Precision component assembly and calibration
- Leak testing and pressure validation
- Electronic control unit (ECU) programming
- Final quality inspection and documentation
Key Equipment
HEPA Filtration System
99.97% @ 0.3 micron particle removal
Helium Leak Detector
1×10⁻¹⁰ mbar·l/s sensitivity
Coordinate Measuring Machine
±2 μm accuracy, 1000×800×600 mm
Automated Vision Inspection
0.01 mm resolution, AI defect detection
ECU & HIL Validation Laboratory
Hardware-in-the-loop (HIL) testing infrastructure for electronic control unit validation with real-time simulation of engine and aftertreatment system dynamics.
Accreditation
Automotive SPICE Level 3 Certified - Assessment ID: AS-2024-341
Testing Capabilities
- Real-time ECU software validation
- Hardware-in-the-loop (HIL) simulation
- CAN/J1939 protocol testing
- Fault injection and diagnostic validation
- OBD-II compliance verification
Key Equipment
dSPACE SCALEXIO HIL System
Real-time simulation, 1 μs timestep
Vector CANalyzer
Multi-protocol bus analysis (CAN, LIN, FlexRay)
National Instruments PXI
Modular test platform, 100+ I/O channels
Oscilloscope & Logic Analyzer
1 GHz bandwidth, 16 digital channels
Live Compliance Dashboard
Monitor ongoing certification progress and compliance status across all regulatory standards
Compliance Documentation Library
Access comprehensive technical documentation, test reports, and certification materials
Discuss Your Compliance Requirements
Connect with our regulatory compliance team to understand how our certified solutions can meet your emission control needs